Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

High Temperature High Strength Polyester Paste

High Temperature High Strength Gel

Epoxy.com PolyPaste


DESCRIPTION

Epoxy.com POLYPASTE is a fast-setting industrial filler paste used for manufacturing, fabrication and repair in aircraft, aerospace and other industries having requirements for above normal temperature exposure. Fast and permanent applications are achieved by POLYPASTE. The service temperature of Filler 7 is up to 400°F (205° C). POLYPASTE is used in the construction industry to seal cracks for injection and for patches used on concrete, wood, steel and other suitable construction materials.

Excellent machining and finishing results are accomplished by grinding, sanding, scraping, etc. When exposed to elevated temperatures,POLYPASTE has a tendency to darken but does not gas, bubble, or cause any finish distortion. This product does not contain wax and readily bonds to itself and other substrates such as FRP/SMC, hi-temp epoxy molds, aluminum, steel, cast iron, urethane foam parts, etc. POLYPASTE is non-metallic, non-conductive, and non-sparking.

APPLICATION PROCEDURES

Surface Preparation

Priorto application, area to be repaired should be roughened and thoroughly wiped clean to ensure proper adhesion.

Mixing Instructions

Thoroughly blend 100 parts resin (a golf ball sized mass) with 2 parts (2? strip) hardener for 1 1/2 minutes in a clean dry container carefully scraping sides and bottom of container during the mixing process to ensure uniformity.

Application

Epoxy.com POLYPASTE should be applied by buttering onto area to be repaired. After material has cured, the repair area can be sanded to desired surface finish.

STORAGE

POLYPASTE should be stored at a temperature less than 75° F. Storage above 75° F will shorten the shelf life and render the product unusable. The shelf life for this product is six months.

SAFETY PRECAUTIONS

For industrial use only.
Keep away from children. Refer to Material Health and Safety Data Sheet (MSDS form) pertaining to this product before using.

Avoid contact with skin oreyes. In the event of eye splash or contact, immediately flush with water for 15 minutes and contact physician. It skin contact occurs, wash with mild soap and water. Prolonged or repeated exposure may cause skin and eye irritation. It is recommended that the user wear impervious gloves and safety glasses with side shields.

HANDLING PROPERTIES

Test Method

Value

Mix Ratio (resin to hardener by wt or vol)

ASTM D-2393

100R to 2H

Viscosity or Consistency

 

Thixotropic Paste

Pot Life(100 gram mass @ 77°F

ASTM D-2471

4-7

CureSchedule @77°F

 

15-20

PHYSICAL PROPERTIES

Density(lbs/gal)

14.13

Specific Gravity (g/cm3)

ASTM D-1475

1.70

Shore Hardness (D)

ASTM D-792

88-90

Service Temperature (peak)

ASTM D-2240

400°F

Stock Colors

 

Lt. Grey, Black

 

 

Proper mixing and installation is critical to the optimal success of all products.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
A Vermont Corporation
USA

We have products that have passed the test of time as well as the best new Systems available today.

Since 1980 - 40 years of the highest quality products

Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)

Closed for lunch from 12Noon to 1PM


321-206-1833  Customer Service - Ordering and Order Status
                         Katey Lambert-Fontaine, VP - Chief Operations Officer
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

Copyright © 1994-2023 (providing online information about the right product for the right job for nearly 30 years)  EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks
We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.